pipe and tube protective film and tape wrapping machine

In the production process of PVC plastic pipes, in order to protect the appearance of the pipes from damage and make them beautiful, the traditional method is: after the pipes are cut and off-line, the workers cover the PVC pipes with tube film, and at the same time wrap the two sides of the pipes. At the end, about 20 centimeters of plastic film needs to be reserved for knotting to secure the beam opening. Because the bag is loose and easy to fall off, the packaging film is not firmly set, and the PVC pipe is easy to move. Sometimes the bag is punctured, resulting in waste of packaging materials. In addition, this manual bagging process is time-consuming and labor-intensive. The current bag package is only to prevent the surface of PVC pipe from being damaged during transportation, and the construction party must remove the package before use, and then manually wrap another film that is tightly attached to the PVC pipe to prevent damage to the PVC pipe during construction. Including the influence of cement, mud, etc. on the surface of the pipe during construction. The whole process is time-consuming and laborious, and it is difficult to guarantee the quality of pipes during transportation and use.

PVC pipe wrapping machine

This protective film and tape wrapping machine provides a package that is wrapped directly and meets the requirements of use, improving the quality of the package, avoiding waste of manpower and materials, and is easy to operate. Using this PVC pipe wrapping machine, it can be done in one step in the production process of PVC plastic pipes, and the packaging that meets the usage requirements can be wrapped directly, which greatly saves manpower and material costs. The machine is easy to operate, and the packaging is reliable. It can play a very good role in protecting the stacking, handling, storage, transportation and construction of the pipes, and can improve the quality of the outer packaging of the pipes.

The PVC pipe film wrapping machine manufactured according to the above scheme can make PVC plastic pipes in one step in the production process, and directly wrap the film that meets the use requirements, which greatly saves manpower and material costs with benefits listed below:

  1. It is superior to traditional packaging pipes in appearance. The pipes after wrapping are beautiful and tidy, and can play the roles of waterproof, dustproof, moisture-proof, anti-scattering, and convenient for import and export.
  2. Reduce packaging costs. The packaging machine uses a plastic film with a thickness of 2 to 3 wires tightly wrapped on the surface of the pipe. It does not need to be removed during construction, and it can be used directly with the packaging film. Compared with the traditional manual bag packaging, it can save the cost of packaging film materials. . According to the calculation of 110 pipes, each device can save the cost of packaging film materials between 50 and 100 dollars per day.
  3. Save labor. And it can improve the logistics efficiency of pipes and reduce the loss during shipment.
  4. The packaged pipe can be sealed, moisture-proof and pollution-proof, and can protect the pipe from external impact damage. In addition, the possibility of product being dismantled and stolen can be reduced.
Protective film and tape wrapping machine for PVC pipes